Built 2026-11-20 (20 November 2026)

Methodology

How gauge readings become fairway depth, load estimates, surcharge tiers, records and status, what is an estimate, and how datums and revisions are handled.

Ground Rules

  • Every number shows its source, timestamp and unit. Metric comes first, with feet in brackets, except for gauges whose authority uses feet (United States and Panama), where feet come first.
  • Every figure that this site calculates and the authority does not publish is labelled estimate. Figures the authority publishes, such as a fairway depth rule, are labelled as the authority's.
  • No reading is typed into a page. Text is built from the data at build time.
  • The site is informational and not for navigation. See the notice.
  • A source is used only when its licence clearly allows reuse on an advertising supported site. See sources.

Readings, Time Zones and Revisions

Readings are fetched hourly and stored in UTC. Each source states time in its own way: German bulk files use winter time all year, Rijkswaterstaat uses a fixed one hour offset, and the Brazilian telemetry uses Manaus local time (a choice checked against the clock, because the service does not say). Every source is converted to UTC when it is loaded, with tests on real files.

A daily value is the mean of the readings in the gauge's own local calendar day. Where a source publishes only one value per day, that value is the day. When a gauge has both metered readings and a source's own daily value for the same day, only the metered readings are used, so a long daily history and recent hourly data are never averaged together.

Readings can be revised. When a value changes, the old one is kept and the new one replaces it as the current value, so nothing is silently overwritten. A reading is shown as raw, provisional, validated or entered by hand.

Fairway Depth

Where the waterway authority publishes an equivalent low water level (GlW) and a nominal fairway depth at it (TuGLW) for a gauge, the depth at a reading is:

depth = reading − GlW + TuGLW, all in centimetres.

This is the depth the authority guarantees, not a surveyed depth. It is published for the Rhine gauges in the German waterways administration's fairway notice and gauge data. It is not published for the Danube, Elbe and Lobith gauges used here, so those pages show no depth. The values are checked weekly against the authority's data.

Load Factor (Estimate)

The estimated share of a full load for a reference vessel is calculated in three steps: allowed draft = fairway depth − margin, held between the vessel's empty draft and full draft; then load share = (allowed draft − empty draft) / (full draft − empty draft), from 0 to 1. Tonnes, where shown, are the share times the vessel's capacity.

The default margin is 0.30 m, from a non-official source, and it is unverified. The reference vessels are 110 m Rhine motor vessel, 135 m Rhine motor vessel; their drafts and capacities are typical planning values, not data from a specific ship, and 5 of 5 reference classes are unverified. Every figure built on them is labelled an estimate. For the Neopanamax and Panamax classes the allowed draft is the Panama Canal Authority's official maximum draft.

No load estimate is shown for the Mississippi, because no verified rule links river stage to loadable draft there.

Carrier Surcharge Tiers

A carrier's advisory lists bands of gauge readings with a fee per container. The site records each band edge and fee as a dated fact with the carrier's link and as-of date, and does not copy advisory text. For a "below X" table a reading belongs to the band with the smallest edge above it. For an inclusive whole centimetre table the reading is rounded to the nearest centimetre first. A reading above the first band has no surcharge, and a reading under the lowest band is "below the published table": no fee is shown.

Carriers do not say which reading of the day they apply, so this site uses the latest reading for the current band and the daily mean to count how many consecutive days a gauge has stayed in that band. A carrier's loading guarantee or transport obligation limit is shown as reached or not reached against the same reading.

Status

Each gauge is Normal, Watch, Restricted, Critical or Not rated. A gauge is rated only from documented lines: the first carrier surcharge band (Watch), the reading at which a carrier withdraws its guarantee or ends its obligation (Restricted), the deepest published carrier band (Critical), the official GlW, an NWS low water threshold, or an INA low water level. The worst matching state applies, and the page names the line that triggered it. A gauge with no documented line is Not rated. A cut marked proposed is this site's own proposal, not the authority's. The Panama draft cuts are of that kind.

Records, Rank and Days Below a Line

A record here is a record in our own archive of daily means, and every one shows the date the archive starts. Where the authority publishes a record low, it is shown beside ours. Recent values are raw, so ours can be lower until the authority validates them.

The rank for the date compares today's daily mean with the same calendar day in every other year of the archive; 29 February uses 28 February in years without one. A rank is shown only when the archive holds at least 10 years. Days below a line count the days on which the daily mean was on the stated side of the line, by year, with the longest unbroken run; a missing day ends a run. The 7 and 30 day changes compare with the daily mean that many days earlier, using the nearest day within one day if the exact one is missing.

Restriction Events

The restrictions archive holds three kinds of event: announcements entered from official advisories, carrier notices, and threshold crossings detected from data. An event is never deleted or overwritten. A correction is added to the same event with its date.

A crossing is detected when a gauge's daily mean stays on the other side of a documented line for 3 consecutive days, from 2020-01-01 on. Older crossings are counted on the records pages instead, because a line such as a low water level can be crossed hundreds of times in a long record. Detected events say they come from raw readings. Advisory announcements are proposed by a parser that reads the Panama Canal Authority's advisories and reviewed by hand before publication. The parser extracts facts only and never copies advisory text.

Monthly Reports, Downloads and Feeds

A monthly report is written for each completed calendar month from January 2025 on. A gauge is included only when at least 80 percent of the month's days have a daily mean, and gauges that are updated by hand each month are left out. The monthly mean is the average of those daily means, the lowest and highest day are the lowest and highest daily mean, and the change is the monthly mean minus that of the month before. The rank compares the monthly mean with the same calendar month in every year of the archive that qualifies, and is shown only when at least 10 years do. All of it is our own calculation from the daily means, so it is an estimate in the sense above and describes our archive, not the authority's full record.

The data downloads hold the same daily min, mean and max the charts use, for every gauge with at least 30 days of history. A day with no reading is left out, never written as zero. Each file names its unit, source and licence, and recent values are raw. The RSS feeds list the restriction events of the archive, newest first, and are rebuilt with the site. The embeddable widgets show one gauge's latest reading, status, time, source and a link back, and carry the not for navigation notice.

Panama Canal

The Panama Canal Authority publishes no formula linking Gatun Lake level to the maximum draft. This site records each announced draft and slot change as published, with the advisory number and link, marks postponed steps as postponed, and does not predict the next change. The daily lake level series is not shown, because republishing it requires the Authority's written consent.

Frequently Asked Questions

Are the readings real time?

No. Readings are collected hourly and the site is rebuilt several times a day, so a page can be several hours behind the source. Every reading shows its own timestamp and age.

Are the readings validated?

Often not. Many authorities publish raw, unvalidated values that are revised later. Pages say when a value is raw, and record lows are calculated from our own archive, not from the authority's published record, until the authority validates them.

What is an estimate on this site?

Anything we calculate that the authority does not publish. Today that is the share of a full load a vessel could carry. It is always labelled "estimate" and explained here.

Why is a gauge "Not rated"?

Because no threshold for it is published by the authority or a carrier, and this site does not invent one. A gauge is rated only from a documented line, and each rating cites it.